This is a
The flood multisensor PAT02 has temperature and humidity,based on Z-Wave technology.
It is the Z-Wave plus product, it support the security, OTA... Those newest features of the Z-Wave technology. Z-Wave is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances.
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications.
Reset to factory default |
|
Inclusion | Pressing the tamper key three times within 1.5 seconds to manual inclusion with Z-Wave controller. |
Exclusion | Pressing tamper key three times within 1.5 seconds to enter the exclusion mode. |
NIF | XXXNIF |
Wakeup | When the device power on, the device will wake about 20 seconds. In this duration, the controller can communicate with the device. Normally the device is always sleeping to save the battery energy. |
Protection | XXXProtection |
FirmwareUpdate | The device support the Z-Wave firmware update via OTA. Let the controller into the firmware update mode, and then press the tamper key once to start the update. After finish the firmware download, the LED will start flash in every 0.5 second. At that time, please don‘t remove the battery , otherwise it will cause the firmware broken, and the device will no function. After the LED stop flash, it is recommended that the user power up the device. Caution: After remove the battery, please wait about 30 seconds, and then re-install the battery. |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|
Dimensions | 0.0280000x0.0230000x0.0850000 mm |
Weight | 35.06 gr |
Hardware Platform | SD3502 |
EAN | 4713698571467 |
IP Class | IP 20 |
Battery Type | 1 * CR123A |
Device Type | Multilevel Sensor |
Generic Device Class | Multilevel Sensor |
Specific Device Class | Routing Multilevel Sensor |
Network Operation | Reporting Sleeping Slave |
Z-Wave Version | 6.51.06 |
Certification ID | ZC10-15060010 |
Z-Wave Product Id | 0x013C.0x0002.0x0020 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |