This is a
2. Start "Inclusion Mode" on the chosen cental units
3. Press the button on the wall plug 3 times whithin a period of around 2 seconds.
Controlable plug for wall outlets including energy and power meter.This device is VDE and CE certified.
Reset to factory default | XXXResetDescription |
Inclusion | 1. Plug the device into the power outlet.
2. Press the button three times in succession. |
Exclusion | 1. Plug the device into the power outlet.
2. Press the button three times in succession. |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 1 | Control other plug or lights on/off |
Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Always Off |
1 | Always On |
2 | Last status |
Dimensions | 56 x 113 x 70 mm |
Weight | 130 gr |
Hardware Platform | ZM4101 |
EAN | 4251295700793 |
IP Class | IP 20 |
Voltage | 230 V |
Load | 3200 W |
Device Type | On/Off Power Switch |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Z-Wave Version | 6.01.03 |
Certification ID | ZC08-12120001 |
Z-Wave Product Id | 0x0154.0x0003.0x1002 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |