This is a
Inclusion and Exclusion are confirmed by a tripple click of the button.
This is a switch plug that can be placed between a British Standard wall outlet (Type G) and electric devices, plugged in by cord. It can switch all electrical loads up to 3500 W. The device is IP 20 rated and can therefore only be used on dry environments. Switching is controlled wirelessly using Z-Wave or locally using a toggleing button. A blue LED indicates the switching status. An automatic "Off" function and programmable switching behavior make the device a very flexible tool for the inhouse lighting.
The plug can be plugged into every British Standard wall outlet for Plug-Type G. It is IP20 rated and can therefore only be used in dry environments. Do not locate the device facing direct sunlight, humid or dusty place. The suitable ambient temperature for the device is 0°C ~ 40°C. Plugs must not be stacked and operated.
The device is able to switch electric loads up to 3500 W and can be switched wirelessly or using the local button.
Local Operation
The local button allowes to switch the device. A short press on the button toggles the switch. If it is in on state the button turns off and respective in off state the button turns on.
LED Usage
The device has one blue LED used to indicate status information. The behavior of the blue LED can be configured:
Automated Switch-Off Function
If activated the switch will turn off automatically after a defined time. This function is particularly useful if the switch is turned on using a motion detector of any other type of sensor. In this case it is possible to further define the reaction of the switch on certain signals sent from a sensor. This allowes a very flexible application of the plug switch in the house.
Reset to factory default | XXXResetDescription |
Inclusion | Inclusion and Exclusion are confirmed by a tripple click on the button. |
Exclusion | Inclusion and Exclusion are confirmed by a tripple click on the button. |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Send Reports on switch state change |
Set LED indication mode Size: 1 Byte, Default Value: 01
Setting | Description |
---|---|
00 | Disabled |
01 | Show switch state |
02 | Night mode (inverted switch state) |
03 | Operated by Indicator Command Class |
If not zero, automatically switch off after a user defined time Size: 2 Byte, Default Value: 0000
Setting | Description |
---|---|
0000 | Disabled |
0001 - ffff | sec |
Defines how to interpret RF Off command. Can be used in conjunction with Auto Off function: Ignore - to switch on the light by motion detectors and switch it off after some amount of time: in case of multiple motion detectors each would try to switch the light off that would break logics; Switch on - to switch on the light on both On and Off paddle press on the remote and switch it off after some amount of time. Button off click will still work (if button operations are not disabled). Size: 1 Byte, Default Value: 00
Setting | Description |
---|---|
00 | Switch off |
01 | Ignore |
02 | Switch on |
03 | Switch on if load is off else switch off |
Defines if the switch should restore switch state to the last state prior to device power off (power cycle). Size: 1 Byte, Default Value: 01
Setting | Description |
---|---|
00 | No, turn off |
01 | Yes |
Dimensions | 0.0600000x0.1010000x0.0610000 mm |
Weight | 119 gr |
EAN | 696859123634 |
Device Type | On/Off Power Switch |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Firmware Version | 01.00 |
Z-Wave Version | 03.2a |
Certification ID | ZC08-13070029 |
Z-Wave Product Id | 0115.1100.0001 |
Frequency | Russia - 868.4MHz, 869.85MHz |
Maximum transmission power | 5 mW |