Z-Wave.Me
4 Button Key Fob
SKU: SCH_KFOB2
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Secure Key Fob is a 4 button Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in a controller or IP Gateway. Although it is controlling other devices, the KFOB can not act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters:
- Direct control of associated devices
- Control of devices in Proximity
- Control of all devices in the Z-Wave network
- Simple and enhanced scene activation
This device support secure communication when included by a controller that also supports secure communication. The device will then send all commands as secure commands unless the receiving device can not accept them. Then the command is send the normal way automatically.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0300000x0.0550000x0.0140000 mm |
| Weight | 32 gr |
| Certification ID | ZC10-15050016 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |