Everspring
Motion Sensor
SKU: SP103
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Motion Detector is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturers Z-Wave enabled networks. This Motion Detector iscontrollable to our modules, such as On/Off Module AN135 and Lamp Module AD130. Inclusion of this Motion Detector on other manufacturers Wireless Controller menu allows remote turn-on of connected modules and their connected lighting when the Detector is triggered. Z-Wave nodes in the system also act as repeaters if they support that function.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Hardware Platform | ZW0301 |
| Device Type | Not Z-Wave Plus |
| Generic Device Class | Sensor Binary |
| Specific Device Class | Routing Sensor Binary |
| Firmware Version | v1.4 |
| Z-Wave Version | 5.03 |
| Certification ID | ZC08-13080009 |
| Z-Wave Product Id | 0x0060.0x0101.0x0001 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |