TESLA Smart Home
TESLA Smart Home Smart Door Window Sensor Zigbee
SKU: TSLZSEN-DOOR
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Whether we"re going on holiday, on a business trip or just shopping, the fear of burglary is always on our minds. TESLA Smart Home Smart Door Window Sensor Zigbee can take away these worries. These small and discreet sensors will make every trip out of the house a lot less stressful.
Constant Overview.
The sensor constantly monitors the position of windows and doors and whenever something suspicious happens, it lets you know immediately.
Easy To Use.
Set everything up in a smart app that you download to your phone or tablet. Thanks to the app, you can keep an eye on your house from anywhere.
Saves Energy.
TESLA sensors are very energy-efficient. They can last up to two years on just one battery.
Stylish helpers who won"t get tired.
The design of these modern guardians is not the only characteristic that is impressive. Their durability will also take your breath away. They can run on a single battery for up to two long years. And if, despite their great energy efficiency, they do run out of power, they automatically ask for a battery replacement.
Zigbee protocol.
The product belongs to a group that uses the ZigBee protocol by which the products communicate with each other. For the proper functioning of these products, it is necessary to have the TESLA Smart ZigBee Hub central unit as part of the smart home. This creates a common network for these products and allows them to interact with each other. For example, if the humidity sensor detects an increased value, it will automatically notify the dehumidifier via the TESLA Smart ZigBee Hub, which will start.
It won"t be caught off guard.
The undesired changes it alerts you to are detected by opening or closing of the two parts.
Google Assistant and Amazon Alexa are no problem.
The sensor TESLA Smart Sensor Window and Door uses the ZigBee protocol. The device is controlled via the TESLA Smart app, which you can download to your Android or iOS phone. The device can also be connected to the smart personal assistants Google Assistant and Amazon Alexa. This just makes working within your smart home even easier.
Keep track from anywhere.
The sensor TESLA Smart Sensor Window and Door uses the ZigBee protocol to interconnect smart home devices. So you won"t miss anything that happens at home. The sensors detect any movement of the windows or doors and immediately send a notification directly to your smartphone or tablet. The app takes just a few minutes to install and is easy to use.
Features:
- Smart Door Window Sensor Zigbee
- ID: TSL-SEN-DOOR
- IP Rating: IP20
- Power Supply: 1x button cell CR2032
- Operating Temperature: -10?40 °C
- Connectivity: Zigbee
- App TESLA Smart: Google Android 6.0+, Apple iOS 11.0+
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0370000x0.0490000x0.0120000 mm |
| Weight | 15 gr |
| EAN | 8596115811096 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.