This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Day and Night Hands-free OFF and ON.
With built-in light sensor, the nightlight could accurately detect the ambient light and automatically turn on and off accordingly under AUTO mode.
Say Goodbye to Darkness.
This nightlight could be applied to multiple places, i.e. bedroom, hallway, kid’s room, garage, etc., wherever you want to light up the dark.
Soft Warm Light Soothe to Sleep.
The nightlight is of 2500K. Side illumination LEDs, with warm color temperature; light soft and comfortable, which allows your families fall asleep at ease.
Energy Efficient and Long Lifetime.
Selected quality LEDs make the nightlight durable and long-lasting. Its rated power is as low as 0.5W.
Battery—free Human-centered Design.
The plug is flexible and removable, which allows you to use different standards of plugs. The plug-in design prevents you from frequently charging the nightlight.
Elegant Appearance All-around Home Decor.
The white, simple and delicate product design fits any home interior style.
Features:
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
Dimensions | 0.0700000x0.0700000x0.0600000 mm |
Weight | 49 gr |
EAN | 6924922203155 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |