Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The KNX Extension Module connects the Zipato Zipabox2 with a KNX network. Adding the KNX compatibility allows to connect and automate KNX compatible devices with various devices with working with other smart home protocols (e.g. Z-Wave, EnOcean, ZigBee) within one smart home network. The module allows to connect up to 250 KNX devices and supports bidirectional communication. Thereby, the devices report back theirs status to the smart home gateway.

Features:

  • Extension module for Zipato Zipabox2
  • Integrates up to 250 KNX device compatible devicesĀ 
  • Connects devices with different technologies in combined automation rules
  • Available Port for additional modules

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0300000x0.0860000x0.0480000 mm
EAN 3858890730197
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device