Quickstart
This is a
Z-Wave Device for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
The Security Extension Module expands the Zipabox2 gateway to support variety of wired security sensors and accessories.
The Security Module can use up to 6 additional zone inputs and has an additional USB port for connection of an USB 3G stick. That can be used for internet backup in case of local internet connection breakdown.
The module also provides supervised auxiliary power output and a lead-acid battery charger, allowing you to power connected devices.
Features:
- Connects wired security sensors and accessories
- 6 on-board wire zones
- 1 siren input
- 1 on-board solid-state relay PGM output (negative or positive triggering selectable)
- 1 supervised bell/siren output,
- 1 supervised auxiliary power output
- 1 general purpose serial port (user-selectable between RS-232 and half-duplex RS-485 mode)
- 1 lead-acid battery charger
- USB port for 3G USB stick connection (internet backup option)
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Technical Data
Dimensions |
0.0000000x0.0000000x0.0000000 mm |
Weight |
104.29 gr |
EAN |
3858890730227 |
Frequency |
Europe - 868,4 Mhz |
Maximum transmission power |
5 mW |