Zipato
Z-Wave controlled LED Lightbulb
SKU: ZIP_bulb
Quickstart
This is a
For Inclusion and Exclusion just tap on the bulb.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
This LED light bulb provides light in different colors. The tone of the color and the dimming level can be controlled using Z-Wave. The bulb fits into a standard E27 socket and operates at standard mains power of 110...240 V. Thanks to the LED technology only 6.7 W are consumed at 100 % dimming level providing a light level of 400 Lumen. This compares to a traditional 60 W incandescent lamp. The standby power consumption is 0.45 W.
Installation
The Light bulb can be screwed into every traditional E27 lightbulb socket and will work right away even without being included into a Z-Wave network. Dimming and changing the color tone however require Z-Wave control.
| Reset to factory default | XXXResetDescription |
| Inclusion | just tap on the bulb. |
| Exclusion | just tap on the bulb. |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0600000x0.0600000x0.1200000 mm |
| Weight | 180 gr |
| EAN | 3858890731026 |
| Certification ID | ZC10-14090005 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |