Z-Wave.Me
Dimmer Set for Everlux
SKU: ZMER05433
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Z-Wave.Me Dimmer Flush Mountable is a wireless actuator able to dim lights up to 300 W. The device is delivered as a complete set with flush mountable insert, paddle and mounting frame compatible with the design of the Duwi switching series Everlux in standard white. The paddle of the device is used to control the device. The status of the dimmer is indicated on a dual color LED for test purposes. For dimming the devices apply leading edge phase cutting with a special alignment algorithm for inductive loads. Therefore, it is possible to dim incandescent lamps, high voltage halogen lights and low voltage halogen lights with traditional transformer. Low voltage halogen lights with switching power supply, LEDs and CFLs must not be attached. This device is designed for a 2 wire system. There is no need for a neutral wire in the wall box.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0000000x0.0000000x0.0000000 mm |
| Certification ID | ZC08-11090002 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |