Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

During Development and Production Z-Wave ICs need to be programmed by an application specific firmware. The Sigma Designs SDK provides a programmer PCB that can be used for test and prototype production. However this programmer is not well suited for production programming. The Z-Wave.Me Programmer is a professional industry-ready tool for programming Z-Wave firmware files while maintaining compatibility to the standard Sigma Designs Programmer software and the standard 2x5 pin programming connector. The Programmer supports series 300, 400 and 500.

Features:

  • Single button and red/green LED for simplified processes in production
  • Built into a robust housing to protect for ESD, dust etc.
  • Interface to connect calibration subsystem to calibrate crystal settings
  • Control software that runs on various operating systems (Windows, Linux, OSx)
  • Built in process to program serial numbers into firmware images
  • Production environment with log files, worker friendly error messages, automated TX calibration
  • NVR settings and firmware file are managed in a csv database to reduce errors in production
  • Protection of crucial pre-calibration values during programming

Download high resolution images for Z-Wave.Me products.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0206000x0.0140000x0.0388000 mm
Weight 43.27 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device