Z-Wave.Me
Z-Wave USB StickC-RAD
SKU: ZME_ZSTICKC-RAD
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Z-Wave.Me Z-StickC connects a PC platform with USB interface to the wireless Z- Wave network. The interface to the Z-Wave network is a standard Z-Wave transceiver module ZM3102 implementing a serial control protocol. The USB stick connects this serial interface to the PC platform. Once the USB stick is connected to the PC the OS of the PC will create a new virtual serial device (/dev/tty.xxxx for Unix/MAC, COM X for Windows) that is used by control software on the PC to communicate with the Z-Wave network. The Z-StickC implements all necessary communication functions of Z-Wave but the functionality depends on the software that uses the Z-StickC.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0240000x0.0770000x0.0060000 mm |
| Weight | 10 gr |
| Certification ID | ZC10-14090020 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |