Z-Wave.Me Dimmer Set for Busch-Jaeger DURO 2000

Product Description

This wall dimmer bundle is intended to control lamps, both with resistive or inductive load. The product consists of:

    &bull    the insert, which can be used with or without local control (equals ZME_06433)
    &bull    a special mounting plate to moount the insert into a pattress box
    &bull    a mounting frame in Busch Jager Duro 2000 series , color standard white
    &bull    the switching paddle for local control of the dimmer

The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is needed for operations. It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software. The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well.

Technical Data:

• Power rating: 230V, 50 Hz
• Wiring: 2-wire-system
• Maximum loads:
  • Incandescent lamps: 40...300W
  • 230V (HV) halogen: 40...300W
  • Low voltage halogen with standard transformer (inductive load): 30...300VA
  • Low voltage halogen with switched power supply (reactive load): no
  • Fluorescent light: 30…300VA, only dimmable lamps
• Wireless behaviour: receiver
• Z-Wave type: slave
• Installation: in pattress box
• Distance: up to 30 m in buildings
• Display: Multicolour-LED
• Interaction: two buttons to be completed with switching paddle for local operation
• Power supply: via 230 V power
• Dimensions: 48mmx48mmx23mm

The Z-Wave.Me dimming Flush-Mountable consists of standard DUWI Z-Wave hardware but located with an enhanced Z-Wave.Me firmware. The insert has two buttons.

Compared to the standard Duwi firmware this product offers a series of important enhancements:

• Works well within networks controlled by an IP gateway
  • status changes are reported back to IP gateway in real time
  • switching paddles can be used to control scenes in gateway
• Implements the most recent advancements of Z-Wave technology Explorer Frame for network wide inclusion and automated reconfiguration of networks
• Improved routing algorithm for faster communication
• Prevention against „Ghost Nodes“ after controller reset

Further enhanced features include

• Configurable night light
• Three association groups (single click, double click, status change)
• Switching paddle can be used for control independently of local operations