Quickstart
This is a
Z-Wave Device for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
This Z-Wave.Me Wall Controller is a single paddle controller to control other Z-Wave devices such as dimmers, switches or window blinds. The unit has dedicated buttons for inclusion, exclusion and association and is able to work as primary controller. The unit is battery powered and can therefore be mounted on every plain and clean place.
Technical Data:
- Wireless behaviour: transmitter
- Z-Wave type: controller
- Controllable Z-Wave groups: 1
- Distance: up to 30 m in buildings
- Display: LED to confirm wireless operations
- Local operation: one paddle plus three dedicated buttons for inclusion, exclusion and association
- Installation: on every flat surface, no pattress box needed
- Power supply: 2 * AAAA Batteries (LR61)
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Technical Data
Dimensions |
0.0710000x0.0710000x0.0110000 mm |
Weight |
19 gr |
Certification ID |
ZC10-14080008 |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |