Quickstart
This is a
Z-Wave Device for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
This battery operated 4 button key gov controller allows controlling other Z-Wave devices such as dimmers, switches or window blinds. It can be used either directly controlling Z-Wave devices directly or to activate scenes in a IP gateway as a scene controller. The four buttons that can be used in a different operation mode to manage a Z-Wave network (Include devices, exclude devices, set associations, ...).
Technical Data:
- Wireless behaviour: transmitter
- Z-Wave type: controller
- Controllable Z-Wave groups: 4 or 4 different scenes
- Distance: up to 30 m in buildings
- Display: LED to confirm wireless operations
- Local operation: 4 buttons
- Control and Setup: 4 buttons plus LED behind the switching paddle
- Power supply: Lithium Battery
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Technical Data
Dimensions |
0.0000000x0.0000000x0.0000000 mm |
Weight |
32 gr |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |