Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The PAN11 is a Plug-in Switch, which can be placed between a wall outlet for Schuko plug and electric devices with a resistive load up to 3000W, plugged in by cord.
In addition, this intelligent plug-in switch is able to detect the voltage, measure the electric power taken by this load (in Wh) and meter the electrical energy consumed (in kWh) as well as detect a possible overload (3010 ~ 3300W) of the connected electrical device. When detecting an overload, the module is deactivated and the LED will flash for 30 seconds.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0580000x0.0950000x0.0750000 mm
Weight 115 gr
Certification ID ZC08-13020007
Frequency XXfrequency
Maximum transmission power XXantenna
RussianZ-Wave Device