Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

StellaZ is a wireless Z-Wave controlled actuator suitable for heating, ventilation and air conditioning systems.
Sensor, controller and actuator are combined in a single device to allow a self-sufficient energy-efficient room control.
The device has four different modes (Normal, Energy saving, Frost protection, direct valve control via Z-Wave) to control and regulate
the temperature. It is also possible to readout the temperature via wireless Z-Wave requests.
Open windows are automatically detected and lead to a temporary reduction of the heating power to save energy.
 

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0200000x0.0420000x0.0120000 mm
Weight 101 gr
Certification ID ZC08-13050002
Frequency XXfrequency
Maximum transmission power XXantenna
RussianZ-Wave Device