This is a
This is a switch plug that can be placed between a wall outlet for Schuko Plugs (Plug Type F) and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A multi color LED indicates the switching status and the assignment of the colors to the switching status can be defined by the user. The device will report any change of the switching status to a central gateway regardless the origin of the switch (local or wireless). A built in virtual power meter will report the power consumption of the load attached. However the user must configure the assumed constant power draw of the load. The local button can control the local load but can also be used to control other functions in a Z-Wave network. Single and Double Clicks are distinguished. The device is certified and tested against all important European Safety Regulations such as EN 61058, DIN VDE 0620-1:2005. The device fully complies with the Z-Wave Plus standard.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0590000x0.1060000x0.0920000 mm |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |