Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Built your own Smart Home Gateway with the Raspberry 1 B+ and a Z-Wave.Me Razberry module! You simply connect the Razberry with the Raspberry 1 B+ and follow the instruction in the supplied manual. The Z-Wave module includes one license for the very powerful Z-Wave software Z-Way. This allows you to automate your entire home with Z-Wave devices. The Z-Wave software provides many possibilities with applying the well-known JavaScript interface technology JSON on a built-in web server. Writing your own home automation apps was never easier and more affordable!

This package includes the Raspberry Pi 1 B+ and the Razberry module. It is only available as long as stock lasts! 

Raspberry Pi B+ - Features:

  • Chip Broadcom BCM2835 SoC
  • Core architecture ARM11
  • CPU 700 MHz Low Power ARM1176JZFS Applications Processor
  • GPU Dual Core VideoCore IV® Multimedia Co-Processor
  • Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
  • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering
  • and DMA infrastructure
  • Memory 512MB SDRAM
  • Operating System Boots from Micro SD card, running a version of the Linux operating
  • system
  • Dimensions 85 x 56 x 17mm
  • Power Micro USB socket 5V, 2A (power adapter not included)
  • Ethernet 10/100 BaseT Ethernet socket
  • Video Output HDMI (rev 1.3 & 1.4)
  • Composite RCA (PAL and NTSC)
  • Audio Output 3.5mm jack, HDMI
  • USB 4 x USB 2.0 Connector
  • GPIO Connector 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
  • Camera Connector 15-pin MIPI Camera Serial Interface (CSI-2)
  • JTAG Not populated
  • Display Connector Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
  • Memory Card Slot Micro SDIO

For more information about the Razbery module please follow the link.

Note: This package is a softbundle and does not include an own packaging for the Kit. Both products are shipped in their original packaging.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0870000x0.0180000x0.0586400 mm
Weight 46 gr
EAN 4251295701370
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device