Popp
POPP Smart Thermostat (Zigbee)
SKU: POPZ701721
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Program and control the multifunctional POPP Smart Thermostat (Zigbee) with your Zigbee-enabled gateway. Save energy and increase your comfort at the same time. The POPP Smart Thermostat is compatible with many Smart Home gateways, such as the Aeotec Smart Home Hub, SmartThings or Home Assistant. Connect your POPP Smart Thermostat directly to the Zigbee compatible Alexa and set the comfort temperature via voice control.
Open Window Detection. POPP Smart Thermostat detects open windows due to sudden drop in temperature. It automatically regulates the temperature down while saving energy and heating costs.
Heat your home only when you need it. Set up individual heating schedules for your rooms with your Zigbee compatible Smart Home gateway. This saves energy and creates a comfortable indoor climate.
Control your home from anywhere. With your Zigbee compatible Smart Home Gateway and POPP Smart Thermostat, a warm home always awaits you. Whether you are coming from vacation or work, with the app of your Smart Home Gateway, the POPP Smart Thermostat regulates the temperature even before you arrive.
Precise temperature control. Thanks to the built-in temperature sensors, the POPP Smart Thermostat senses the exact room temperature. The adaptive learning function detects the size of the room and adjusts the valve control.
Easy control. Adjust the room temperature at any time. Easily set your comfort temperature via your smart home gateway"s app or directly on the thermostat.
Compatibility. The POPP Smart Thermostat is equipped with the Zigbee wireless standard. This allows it to connect to numerous smart home gateways, such as the Aeotec Smart Home Hub, SmartThings or HomeAssistant.
Voice control. Connect your POPP Smart Thermostat directly to the Zigbee compatible Alexa - Amazon"s voice control.
Reliable and quiet. The POPP Smart Thermostat relies on proven technology from the market leader in heating thermostats. With a noise level of less than 30dBA, the thermostat regulates the temperature and lets you sleep without disturbance.
Easy installation. The POPP Smart Thermostat can be installed within a few minutes - without professional tools. Thanks to the included adapters (RA, M30, RAV & RAVL), the thermostat fits 98% of all radiators.
Features:
- Programming and control via a Zigbee gateway
- Zigbee 3.0
- Wireless frequency: 2.4 GHz / <40mW
- Compatible with Aeotec Smart Home Hub, SmartThings, Home Assistant and Amazon"s Alexa Echo Plus.
- Energy savings
- Easy to install and to operate (also manually operated)
- Automatic Open Window Detection by temperature drop or Zigbee command
- Built in temperature sensor
- Low noise
- PID precise temperature control
- Adaptive learning
- Easy-to-read LCD display
- Display rotation 180 degrees
- Child lock function can be activated via Zigbee
- Frost protection function
- Valve training function
- Illuminated display
- Battery lifetime up to 2 years
- Visual warning of low battery
- Fits RA, M30, RAV, RAVL (adapter included) and RTD, M28, Caleffi, Giacomini (adapter not included)
- Temperature setting range: 5- 35°C
- Integrated temperature sensor range: -20 - 65°C
- Power supply: 2x AA batteries
- Power consumption: 3 mW in standby, 1.2 W during activity
- Spindle movement: Linear, up to 4.5mm, max. 2mm on valve (1mm/s)
- IP class: 20
Download high resolution images for POPP products.
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0550000x0.0550000x0.0750000 mm |
| Weight | 133 gr |
| EAN | 4251295701721 |
| Certification ID | ZIG21051ZB330911-24 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.