ThirdReality

ThirdReality Smart Color Bulb ZL4 E27 (Zigbee)

SKU: 3RDZP1SBZA1-EU

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

The THIRDREALITY Smart Color Bulb ZL4 with E27 socket is a modern smart LED light designed for anyone who wants flexible and intelligent home lighting. It supports the Zigbee 3.0 standard and integrates seamlessly with popular smart home systems such as Home Assistant, SmartThings, Hubitat, Homey, Aeotec, as well as Echo devices with a built-in Zigbee hub. In addition to easy control, the bulb features an integrated Zigbee repeater function that strengthens the mesh network and improves signal range and connection stability throughout the entire home.

With millions of selectable RGB colors and adjustable white light ranging from warm 2700 Kelvin to cool 6500 Kelvin, the Smart Color Bulb ZL4 creates the perfect lighting atmosphere for any situation. Brightness is continuously dimmable from 1 to 100 percent and reaches up to 810 lumens, making the bulb suitable both for ambient lighting and as a powerful primary light source. Thanks to its wide color range and precise light control, it is ideal for living rooms, bedrooms, offices, restaurants, hotels, or decorative lighting for events and celebrations.

Control is conveniently handled via an app, automations, schedules, or voice commands when used with compatible voice assistants. Compared to Wi?Fi light bulbs, Zigbee lighting is especially energy efficient and helps reduce overall power consumption. Regular OTA firmware updates ensure that the Smart Color Bulb ZL4 remains secure and can be enhanced with new features over time. With its standardized E27 socket and 230?volt operating voltage, it is perfectly suited for the European market and can be installed quickly and easily.

Highlights:

Zigbee 3.0 standard with mesh repeater function
Millions of RGB colors plus adjustable white light
Color temperature adjustable from 2700 K to 6500 K
Dimmable from 1% to 100%
High brightness of up to 810 lumens
OTA updates for long-term reliability
Lower energy consumption compared to Wi?Fi lighting

Technical Data:

Socket: E27
Bulb shape: A60
Light color: RGB + Tunable White
Color temperature: 2700 K – 6500 K
Brightness: up to 810 lumens
Dimmable: yes, 1% – 100%
Wireless standard: Zigbee 3.0
Repeater function: yes
Operating voltage: 220–240 V AC

Box Contents:

E27 bulb
Quick start guide

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions	0.0600000x0.1180000x0.0600000 mm
Weight	42 gr
EAN	0850001595957
Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.