Shelly (Allterco Robotics LTD)
Shelly Plus Smoke
SKU: ALRLPLUSSMOKE
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Shelly Plus Smoke is a smart photoelectric smoke sensor which is effective at detecting slow fires that smoulder for hours before bursting into flame. Receive instant notifications on your phone and create safety scenes to keep your family and home safe.
Be always alerted, no matter where you are! Shelly Plus Smoke is a wire-free, battery-operated alarm that can help provide additional protection for your home, family, and pets. Its long life span, high sensitivity, and Wi-Fi technology allow you to constantly monitor your home for any smoke and keep your family safe, wherever you are.
Wi-Fi & Bluetooth connectivity.
Connect Shelly Plus Smoke to your Wi-Fi network. No HUB required!
Up 3 years of battery life.
Count on low-battery-consuming technology.
Sound & light alerts.
If smoke is detected, Shelly Plus Smoke will initiate a loud sound (>85db) and light alarm.
Easily mountable.
Shelly Plus Smoke is wire-free and has no angle limitations, making it very easy to install.
Immediate notification.
No matter where you are, Shelly Plus Smoke will immediately notify you of any danger. In case of any detected danger, Shelly Plus Smoke will immediately inform you and your family members in real-time and allow you to take action, no matter how far away you are. When Shelly Plus Smoke detects a risk, it sounds a loud alarm for everyone inside to hear, while simstarts the personalised scene you"ve selected for the event, and notifies you through the app, no matter how far away from home you are.
Smart scenes.
Set custom scenes by combining Shelly Plus Smoke with your other Shelly devices. These scenes can be customised to your liking and happen in an exact order and time frame.
Cuts off power supply to all appliances.
In order to prevent further damage, Shelly Plus Smoke can trigger your other Shelly devices using scenes or webhooks to quickly cut off the power to all appliances in the room where the fire has occurred.
Notifies you if anyone is in the room.
Together with Shelly Motion2, you can be instantly alerted if motion is detected in the room. Additionally, using webhooks, it can trigger other devices like cameras, speakers, or any connected devices to help you monitor from afar.
Turns on emergency lighting and unlocks all doors.
If you have RGBW bulbs, strips, or alarms around your home, Shelly Plus Smoke can trigger them to turn red and lead the way to the nearest exit for anyone who is in the house. Simultaneously, all doors can be unlocked for your family to make a quick exit through the house.
Local control of all your devices.
Shelly Plus Smoke Alarm can execute direct actions on other devices on your local network without being connected to the Internet or Shelly Cloud. Count on immediate response time and local scenes to keep your home safe.
Shelly Cloud App.
Download the Shelly Cloud App. Sign up/in to your account to begin your Smart home or Office journey. Available for iOS, Android, and Huawei!
Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice!
Features:
- Smoke Sensor Wi-Fi
- LED indications and loud alarm; Alarm pause (Hush mode)
- Low battery warning
- Easy installation
- Sensor type: Photoelectric
- Range: Up to 30 m
- Webhook and MQTT enabled
- Mounting: Ceiling
- Ambient temperature: -0 °C to 55 °C / 32 °F to 131 °F
- Humidity: 30 % to 95 % RH
- Power supply voltage DC: 1x 3 V CR123A battery
- Battery life: Up to 3 years
- RF band: 2401 - 2495 MHz
- Max. RF power: <20 dBm
- Wi-Fi protocol: 802.11 b/g/n
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0850000x0.0850000x0.0280000 mm |
| Weight | 77.5 gr |
| EAN | 3800235265598 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.