Shelly (Allterco Robotics LTD)

Shelly PRO EM-50

SKU: ALRLPROEM-50

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Wi-Fi Energy Meter with Contactor Control.
Shelly Pro EM-50 is a DIN rail mountable two-channel, single-phase energy meter. It has an integrated switch with dry contacts for contactor control.

LAN, Wi-Fi and Bluetooth connection for high security and reliability
Reports accumulated energy, as well as instantaneous voltage, current, active and apparent power per phase in real time
Power metering - two independent measurement channels on the same phase
4 Quadrant measurement with optical pulse indication of energy usage
Can be used with contactors for bigger loads
Accuracy Class B (IEC 62053-21)
Photovoltaic ready
Stores data in non-volatile memory that can be retrieved for a period of up to 60 days in 1-minute intervals.
No hub required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants. Use it with Alexa, Home Assistant, or your preferred automation system.
Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates & Modbus TCP protocol
*Package includes 2 pieces of 50 A Current Transformers

WHY PRO EM-50?
Your Smart Solution for Accurate Energy Monitoring and Control
Shelly Pro EM-50 is a DIN-mountable 1-Phase Energy Meter with an integrated switch for contactor control. With active energy measurement accuracy of 1%, Shelly Pro ??-50 can be used to monitor the consumption of and control any home appliances, electric circuits, and office equipment. It features 60 days of on-device historical data with a 1-minute resolution. Additionally, its scripting functionalities allow for the execution of complex scenes and provide broader monitoring abilities.

Wi-Fi, LAN and Bluetooth connectivity.
Simultaneous Ethernet and Wi-Fi usage. MQTT, inbound and outbound WebSocket, UDP, mTLS support.

Accuracy class B (active energy).
Shelly Pro EM-50 has a measurement accuracy of 1%.

MODBUS support.
Allows for easy and fast deployment in existing industrial installations.

Power measurement.
Monitors two independent channels on the same phase.

Integrated switch.
2 A dry contacts switch for contactor control.

Scripting.
Shelly Pro EM-50 fully supports mjS scripting, allowing you to create further features and functionalities.

Use Cases.
Perfect for SMB owners?.
If you are a small or medium-sized business owner, you have probably struggled with energy overconsumption. Some machines and appliances are switched on all the time. With Shelly PRO EM-50, you can measure with utmost precision and reduce consumption by turning off load - water dispensers, laminating machines and lighting, during the night. The smart device can also be applied for preventative measurement by monitoring for abnormal behavior of HVAC, air compressors, refrigerator units and others.

Renewable energy ecosystem at home?.
If you have a photovoltaic system (PV) at home, Shelly PRO EM-50 can help you measure grid and imported energy from renewable sources. Moreover, it has configurable load control, which allows you to redirect any excess energy generated from renewable sources to electronic devices at your home and optimize your energy consumption. For example, you can use Shelly PRO EM-50 for charging your car or home appliances when your PV system provides excess energy. ?

Shelly Smart Control is here!
One app to control your spaces, energy consumption, and expenses.

Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice!

Features:

Mounting: DIN rail
Screw terminals max torque: 0.4 Nm / 4.43 lbin
Conductor cross section: 0.5 to 2.5 mm² / 20 to 14 AWG (solid, stranded and bootlace lugs)
Conductor stripped length: 6 to 7 mm / 0.24 to 0.28 in
Shell material: Plastic
Color: White
Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F
Humidity: 30 % to 70 % RH
Max. Altitude: 2000 m / 6562 ft
Power supply voltage AC: 110 - 240 V, 50/60 Hz
Power supply voltage DC: N/A
Power consumption: < 3 W
Max switching voltage AC: 240 V
Max switching voltage DC: N/A
Max switching current: 2 A
Internal-temperature sensor: Yes
Voltmeter (RMS): 100 - 260 V
Voltmeters accuracy: ±1 %
Ammeters (RMS via CT): 0 - 50 A
Ammeters accuracy: ±1 % (5 - 50 A), ±2 % (0 - 5 A)
Power and energy meters: Active and apparent power
No load threshold: 30 VA per phase
Measurement data storage: At least 60 days of 1 min data resolution
Data export: CSV for PQ recorded values
RF band: 2400 - 2495 MHz
Max. RF power: <20 dBm
Wi-Fi protocol: 802.11 b/g/n
Bluetooth Protocol: 4,2
CPU: ESP32-D0WDQ6
Flash: 16 MB
Webhooks (URL actions): 20 with 5 URLs per hook
Scripting: Yes
MQTT: Yes
CoAP: No

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions	0.0180000x0.1000000x0.0700000 mm
Weight	163 gr
EAN	3800235268148
Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.