Shelly (Allterco Robotics LTD)

Shelly Pro 3EM

SKU: ALRLSHELLYPRO3EM


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Shelly Pro 3EM is a DIN rail mountable three-phase energy meter. Enhanced with all the gen2 firmware flexibility and LAN connectivity, it provides professional integrators with additional options for end-customer solutions. Shelly Pro 3EM reports accumulated energy as well as instantaneous voltage, current, and power factor per phase in real-time. Package includes 3 pieces of 120A Current Transformers

Features:

  • DIN rail mountable three-phase energy meter
  • Current Transformer: 3 x CT120 included in the package
  • Mounting: DIN rail
  • Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F
  • Humidity: 30 % to 70 % RH
  • Power supply voltage AC: 110 - 240 V, 50/60 Hz
  • Power consumption: < 3 W
  • Temperature sensor: Yes
  • Wi-Fi protocol: 802.11 b/g/n
  • Bluetooth Protocol: 4.2
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0190000x0.0950000x0.0700000 mm
Weight 287 gr
EAN 3800235268100
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device