Aqara
Aqara Smart Video Doorbell G4 Wi-Fi
SKU: AQALSVD-C03
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
The Aqara G4 is a unique video doorbell that can be wired or battery-powered. With built-in AI-based facial recognition algorithms, your customer can tag the faces of their family members and frequent visitors in the Aqara Home app, reducing false alarms and notifications.
With 24/7 1080P FHD recording, your customer can check what happened at their front door at any time. In addition to the free event-based cloud storage of up to 7 days included in the scope of delivery, the doorbell repeater also supports micro SD cards with up to 512 GB, which cannot be accessed externally. HomeKit, Alexa, Google Assistant and IFTTT are supported.
Mounting.
The outdoor doorbell can be mounted on the wall, the indoor unit can be mounted on the wall or placed on a flat floor.
Language change option.
The G4 has a unique dialogue technology for language switching. It is something special in the category of video doorbells. The user can change the voice of the intercom to an uncle, robot and clown voice, which can better protect the user"s privacy and identity.
Support for "Do not disturb" mode.
The user can customise the doorbell ring time and ring volume. When Do Not Disturb mode is enabled, users can sit back and relax even if someone rings maliciously in the middle of the night.
Personalised custom ringtones.
Assists users in uploading personalised ringtones that can be automatically configured to play on the outdoor doorbell or indoor repeater and allows for automatic shortcut configuration, such as detecting strangers and sending "Tom is not home, please come back tomorrow" on the outdoor doorbell.
Various alarms for abnormal conditions.
When the doorbell is forcibly dismantled, the outdoor temperature is abnormally high/low, people stay at the door, the battery power is low, etc., the alarm state can be flexibly configured to remind the owner to pay attention to the security status of the door and the operating status of the equipment.
Set masking area.
Privacy protection can be set for up to 3 specific areas on the screen. After setting, the specified areas on the live screen and video screen will be blocked, which can protect the privacy of neighbours. This function is particularly suitable for users who live in apartment blocks.
Features:
- Wireless connection: 2.4GHz, IEEE 802.11b/g/n
- Video resolution: 1080p FOV 162°(subtended angle)
- Battery specification: 6x AA 1.5V LR6 batteries
- Power supply: 12V-24V AC 0.2A 50/60Hz 8V-24V DC 0.5A
- Local storage: Support up to 512 GB microSD card
- Repeater power supply: 5V/1A USB-A to USB-C supply line
- Operating temperature: -18° - +50°
- Operating humidity: 0%-95%, non-condensing
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.1410000x0.0650000x0.0310000 mm |
| Weight | 163 gr |
| EAN | 6970504218659 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.