BeNext
Panic Watch
SKU: BENECR2450
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Aeon Labs Panic Button is a one button remote control, which is specifically designed for emergency situations.
This Panic Button will work as a remote control within your Z-Wave network, allowing it to both control associated devices and act as a tool for adding/ removing devices to/ from your Z-Wave network.
You can also use this onebutton remote control for non-emergency situations, e.g. to communicate with a Z-Wave device for turning on/ off or dimming the lighting or switching a device (garage doors).
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0000000x0.0000000x0.0000000 mm |
| Weight | 0.03 gr |
| EAN | 4008297484103 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |