Aeotec
Aeotec TriSensor 8
SKU: B_AEOEZWA045
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Perfect and upgrade your Smart Home with TriSensor 8 – Z-Wave 800 series.
Introducing the future of smart home security and comfort with Aeotec TriSensor 8 (Z-Wave 800 Series). TriSensor 8 with comes with integrated temperature and light sensors. Experience ultimate control and peace of mind with precise motion detection, environmental monitoring, and seamless compatibility by state of the art Z-Wave 800 series, which guarantees safety, reliability and range for your Smart Home. Elevate your home automation game today!
Enhanced Control, Safety, and Energy Efficiency with Motion Detection.
Take command of your connected devices and optimize energy savings with our cutting-edge motion detector of TriSensor 8. Seamlessly manage lighting, heating, and cooling systems as they respond intelligently to your presence. Now with a remarkable 10-meter motion detection range. With TriSensor 8, enjoy enhanced security with automated alerts and an energy-efficient home that adapts to your needs. Incorporating the latest advancements of Z-Wave 800 series, TriSensor 8 ensures compatibility and future-proof performance for your smart home setup.
Experience Effortless Control with Light Sensor Technology.
Imagine your blinds and shades adjusting seamlessly, following the arc of the sun to optimize natural light while maintaining privacy. Your compatible lamps intelligently dim or brighten based on the time of day, effortlessly creating the perfect ambiance. Now equipped with a more accurate light sensor, TriSensor 8 (With Z-Wave Gen 8) excels at recognizing various light conditions, from gentle morning sunlight to the golden glow of sunset.
Unlock Precision Comfort with Temperature Sensor.
Experience comfort like never before with our cutting-edge temperature sensor. Say goodbye to manual thermostat adjustments and hello to a space that automatically adapts to your ideal temperature. TriSensor 8 is now equipped with a more accurate temperature sensor, whether you’re at home or away, our sensor ensures your environment is always just right, while maximizing energy efficiency. From heating and cooling systems to smart blinds and appliances, any device can become a part of your personalized climate control solution.
Your Space, Your Way.
Place your TriSensor 8 wherever your imagination takes you. You can effortlessly position it in the optimal location for unrivaled performance. Whether it’s on a wall, ceiling, shelf, or table, our TriSensor 8 adapts to your living space, ensuring accurate readings and seamless integration with your smart ecosystem. Embrace the freedom to put intelligence exactly where you need it, effortlessly and elegantly.
TriSensor 8 - Your Power, Your Placement.
Features:
- Motion detection of objects in up to 10m range
- Increased temperature detection accuracy
- Enhanced Light sensing
- Latest Z-Wave 800 series technology
- Z-Wave Long range enabled with up to 1.6 km range (only in US)
- Battery Lifetime of up 2.5 years
- Fits into Aeotec Recessor for inwall installation
Technical Specs:
- Z-Wave Series 800: Yes
- S2 Security: Yes
- Long Range: Yes
- Power supply: battery powered (1×CR123A batteries, 3V, 1500mAh).
- Sensor Technical information: Measured temperature range: -10°C to 50°C [±1°C] / 14°F to 122°F [±1.8°F] ; Lighting: 0 LUX to 30000 LUX [±3%]
- Max motion detection range: 10 meters/33 feet.
- Waterproof: IP20 rating
- Operating distance: Up to 200 meters outdoors / Up to 656 feet outdoors.
- Long Range Network Up to 1.6km / Up to 1 Mile
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.