Yale

Yale Smart Video Doorbell

SKU: B_YA-SV-VDB-1A-W

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

With the Yale Smart Video Doorbell, you can see, hear and speak to visitors anywhere and anytime.

The intelligent video doorbell for home surveillance is easy to operate and install. Thanks to Wi-Fi and a powerful integrated battery, the smart video doorbell can be installed flexibly at almost any location on your front door with little effort. For a permanent power supply, you can of course also connect the video doorbell to the existing doorbell wire as an option.

The camera offers a razor-sharp FullHD image, live view and night vision for clear recordings that can be viewed in the Yale Home app. You get a "call" to your smartphone when the doorbell is pressed and detailed notifications when the inbuilt motion sensors are triggered so you never miss a delivery or guest again. The Smart Video Doorbell also offers additional monitoring features such as AI to detect people, vehicles*, animals* or parcels* as well as definable zone detection & masking. *Some AI functions, such as parcel, animal or vehicle detection and additional cloud recording, are available as part of an optional subscription.

APP-Control

Stay connected to your home, no matter where you are. Control and monitor your front door with the Yale Home app, from anywhere in the world. Requires 2.4 GHz WLAN.

LIVE VIEW & TWO-WAY AUDIO

With the Yale Home app, you can access live video images from your security camera at any time and communicate with visitors in real-time thanks to the two-way audio function.

REAL-TIME NOTIFICATIONS

You get a "call" on your phone when someone rings the doorbell and push notifications when movement is detected near your front door. Never miss a parcel delivery or an unexpected visitor again.

NIGHT VISION

Don"t let the darkness jeopardize your safety. The Yale Smart Video Doorbell has an advanced night vision function that provides clear and detailed images even in low light conditions.

SIMPLE INSTALLATION

The video doorbell for home surveillance is easy to set up and can be operated wirelessly with an integrated rechargeable battery or with a permanent wired power supply.

CUSTOMISABLE ZONES

Set certain areas for motion detection. This means you only receive the really important notifications by excluding irrelevant areas from motion detection. You can also define privacy zones so that recordings are masked with a black bar and are therefore not monitored.

PERSON, VEHICLE & PARCEL RECOGNITION

Minimise unnecessary notifications with people detection, get notified about nearby vehicles* and never miss a delivery again with parcel detection*. (*A subscription is required for vehicle and parcel detection).

RECORDINGS DURING MOVEMENT

Record videos or images that you can view and save at any time when motion is detected at home. The recordings can either be saved locally on the camera"s internal flash memory or in the Yale Cloud*. (*Subscription required.)

WEATHERPROOF

With an IP65 protection rating, the Yale Smart Video Doorbell is designed to withstand outdoor conditions and work reliably even in difficult weather conditions.

COMPATIBILITY

Works seamlessly with other smart products from Yale and partners such as the leading voice assistants Amazon Alexa and Google Home.

Properties:

Camera features: 1080p full HD, digital pan and zoom (up to 8x), night vision (6m),
Wide dynamic range (HDR), IP65 (weatherproof), tampering alarm
Viewing angle: 154°
Communication: WLAN 2,4 GHz
Audio features: Microphone and speaker for two-way audio, full-duplex audio, echo cancellation and AAC audio codec
Smart features: Motion Detection, Detection Zone, Privacy Zone, People Detection, Pet Detection*, Vehicle Detection*, Parcel Detection* (*Available with a subscription plan - check availability in your country on the Yale website).
Video storage options: Built-in local storage on flash memory, 30-day recording in the cloud* (*Available with a subscription plan - check availability in your country on the Yale website).
Power supply solution: 6500 mAh integrated battery (charged with the USB-C cable), constant power supply via existing 8-24 V bell cables or the Yale AC adapter (sold separately)
Battery life: Up to 4 - 6 months** (**Battery life depends on the use and configuration of the Yale Smart Outdoor Camera).
Scope of delivery: 1x camera, 1x charging cable, 1x mounting bracket, 1x mounting bracket, 1x mounting material, 2x connection cable, 1x Doorbell, 1x Protected by Yale Sticker, 1x Quick start guide

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.