Yale
Yale Smart Indoor Camera
SKU: B_YA-SVIC1AWEU
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Keep an eye on your home"s interior with our Yale Smart Indoor Camera.
Ideal for pet owners, parents who want to keep an eye on their kids, or anyone who want to keep watch inside their home while they are away with the Yale Home app, the Smart Indoor Camera provides crisp 1080p Full HD image, live view, motion-triggered recordings, night vision, rich notifications, a two-way audio talk feature, and integration with leading voice assistants. With customisable detection zone & scheduling you can define specific areas you want your camera to cover, and use motion scheduling to exclude otification triggers from regular occurrences. App control: Control and monitor your house using the Yale Home app, from anywhere in the world. Privacy mode: Camera can turn off automatically when you come home*. (*Requires a Yale Smart Lock or a Smart Alarm. For example, when you unlock the door with a Yale Smart Lock and/or disarm the alarm, your camera goes into privacy mode.)
Human detection: Enable Human Detection to minimise unnecessary notifications.
Highlights:
- Full 1080p HD image around the clock with live view and night vision
- Motion detection feature with the option to customize detection zones
- Easy to set up both hardware and software
- Receive an app notification with thumbnail when motion is detected
- Use the two way audio to speak and listen through the camera
- Have the camera standing on a table or mount it on a wall with the mounting plate
- Adjustable camera head that can be rotated 360° and folded 90° for optimized viewing angles
Features:
- Camera Features: 1080p Full HD, Digital Pan & Zoom (up to 8x), Night Vision (6m), Wide Dynamic Range (WDR)
- Viewing Angle: 110°
- Communication: Wi-Fi 2.4 GHz
- Audio Features: Microphone and speaker for two-way audio, Full duplex audio, echo cancellation and AAC audio codec
- Intelligent Features: Motion Detection, Detection Zone, Privacy Zone, Human Detection, Pet Detection* (*Available with subscription plan - check Yale website for availability in your country)
- Video Storage Options: Built in local storage on flash memory, 30-day Cloud Recording* (*Available with subscription plan - check Yale website for availability in your country)
- Product Dimensions (W x D x H): 70mm x 70mm x 115mm (excluding mounting plate)
- Product Weight: 106g
- Power Solution: Powered via a USB-C cable and a power adapter (included in the box)
- Scope of Delivery: 1x Camera, 1x Charging Cable, 1x Mounting Bracket, 1x Mounting Material, 1x Protected by Yale Sticker, 1x Quick Start Guide
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.