Yale

Yale Smart Safe

SKU: B_YA-YSS_250_EB1

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

You value it. We protect it.
Protect your valuables, like documents or jewellery with the Yale Smart Safe. Unlock the safe or share access with people you trust from anywhere, through your Yale Access App on your smartphone. No phone? Unlock your Smart Safe using your Apple Watch, the keypad or the physical key.

Please note: The Yale Connect Wi-Fi bridge is required for remote access and SmartThings use.

Features:

Laser cut door for protection against break-ins
Locking mechanism with two anti-saw locking bolts (20mm)
In case of dead battery, use 9V battery (not included) for quick access
Lock down for five minutes after five incorrect attempts
Internal light for contents to be easily seen
Includes keyhooks and removable shelf

Specifications:

Physical security: Laser cut door and anti-saw bolts for protection against attacks
App security: Two-layer encryption, biometric verification and two-factor authentication
Communication frequency between Smart Safe and accessories: Bluetooth – 2.4GHz
Technology between Smart Safe and smartphone: Bluetooth directly or via Bluetooth and Wi-Fi if a Yale Connect Wi-Fi Bridge is paired.
Keypad access: Set entry codes for phone-free access
Key access: Mechanical override that includes 1 double bitted key
Tamper resistant: Locks down for five minutes after five incorrect attempts. Tamper alarm sounds after five incorrect attempts
Mounting: Secure with included bolts
Automatic door: Automatic door opening mechanism
Additional features: Internal light gives you clear visibility of your valuables. Shelf & internal hooks for hanging keys or small items
Weight: 12.1kg
Requirements: Requires free Yale Access App for iOS or Android. Yale Connect requires Wi-Fi internet connection and a power socket within 3 metres of safe
In the box: Yale Smart Safe, Mounting Hardware, 4 AA Batteries, Physical Key

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

Make sure a device is in factory reset state before including. In doubt exclude before include.
If inclusion still fails, check if both devices use the same frequency.
Remove all dead devices from associations. Otherwise you will see severe delays.
Never use sleeping battery devices without a central controller.
Dont poll FLIRS devices.
Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Frequency	XXfrequency
Maximum transmission power	XXantenna

Explanation of Z-Wave specific terms

Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
Inclusion — is the process of adding new Z-Wave devices into a network.
Exclusion — is the process of removing Z-Wave devices from the network.
Association — is a control relationship between a controlling device and a controlled device.
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.