Eurotronic

Eurotronic ET Shutter WiFi

SKU: EURL700217


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The ET Shutter WiFi is a smart shutter switch designed for convenient and intelligent control of roller shutters and blinds. It connects directly to an existing 2.4 GHz Wi?Fi network, eliminating the need for an additional gateway. This combines the familiar operation of a classic shutter switch with modern smart home technology.

Using the Eurotronic Smart Living 2.0 app, you can control your roller shutters at any time via smartphone, whether you are at home or on the go. Individually adjustable schedules, percentage-based positioning, and automatic end position detection provide maximum comfort, improved privacy and sun protection, and increased energy efficiency in everyday life. The ET Shutter WiFi is ideal for retrofitting and is compatible with common switch programs from Busch?Jaeger, Gira, and Merten. Manual operation via the wall switch remains possible at all times.

Highlights

  • Smart shutter switch with direct Wi?Fi connection (no gateway required)
  • Control via the Eurotronic Smart Living 2.0 app
  • Customizable schedules and vacation mode
  • Precise percentage-based shutter positioning (e.g. 50% for sun protection)
  • Automatic and manual end position detection
  • Current shutter status visible in the app
  • Manual operation via the switch remains available
  • Remote control from anywhere
  • Compatible with Busch?Jaeger, Gira, and Merten switch programs
  • Suitable for shutter motors with internal limit switch
  • Easy flush-mounted installation for indoor use

Technical Data

  • Power supply: 230 V / 50 Hz
  • Wireless standard: WiFi (IEEE 802.11 b/g/n)
  • Frequency range: 2.4 GHz (2412–2472 MHz)
  • Maximum switching load: up to 575 W / 2.5 A / 230 V
  • Standby power consumption: max. 0.2 W
  • Relay: 2× normally open contacts (µ-contact)
  • Cable cross-section: 0.2–1.5 mm²
  • Cable type: rigid and flexible
  • Protection class: IP20
  • Application area: indoor use
  • Operating temperature range: 0 to 50 °C

Package Contents

  • 1× ET Shutter WiFi shutter switch
  • 1× adapter block for Busch?Jaeger, Gira, and Merten
  • 1× adapter frame for Busch?Jaeger, Gira, and Merten
  • 2× mounting screws (3.2 × 15 mm)
  • 1× quick start guide / instruction manual
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0700000x0.0700000x0.0430000 mm
Weight 55 gr
EAN 4260012712018
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device