FIBARO
FIBARO Starter Kit + Swipe
SKU: FIBESTARTFSWIPE
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Get a great deal when buying a Fibaro Starter Kit! Buy it and get a FIBARO Swipe for only 50€ on top.
Start into the world of home automation and get a FIBARO Swipe for a promotion price. Turn your home into an intelligent Smart Home. Security, Comfort, Energy Savings – Everything is connected and makes your life easier and more comfortable.
You don’t know how to start? No problem!
FIBARO has already bundled a range of useful components in this starter kit. Start your smart home with the Z-Wave control center ‘Home Center Lite’ and 6 smart single devices. The starter kit already allows various automation scenes out-of-the-box.
Turn a lamp on, which is plugged into the switchable Wall Plug, as soon as the Motion Sensor detects motion. Or switch the Wall Plug off automatically when the window is opened. The Smoke Sensor will alarm acoustically in case of smoke or emerging fire and sends a push notification to your smartphone simultaneously. The Flood Sensor warns also acoustically and with push notification in case of detected water. The FIBARO Starter Kit’s components also allow a lot of other functions and automations. Find it out!
FIBARO Home Center Lite (Control Center):
- Z-Wave Smart Home Gateway
- Compact design
- Manages up to 230 devices
- User-friendly user interface
- Creating automation scenes
- Remote control via web browser and mobile apps (iOS and Android)
- Dimensions: 90x90x33 mm
FIBARO Swipe:
- Touchless Gesture control
- Great design, costumize it with a picture
- Controls your smart home with different gesture combinations
- Can be placed underneath a table or other surfaces
- Installation behind the wallpaper
- Battery powered or mains-operated
- Dimensions: 178 x 130 x 29 mm
FIBARO Flood Sensor (Water Leakage Sensor):
- Alarms in case of water contact
- Prevents flood damages
- Acoustic and optic alarm
- Detects sudden change in temperature (e.g. freez or fire)
- Tilt sensor
- Modern rounded design
- Dimensions: 72x72x28 mm
FIBARO Smoke Sensor:
- Alarms in case of smoke or fire
- Acoustic and optic alarm
- Inconspicuous rounded design
- Black-Box function
- Easy installation
- Dimensions: 65x65x28 mm
FIBARO Door/Window Sensor:
- Reports state of windows, doors and gates (open/closed)
- Applicable for security and comfort scenes simultaneously
- Color: White
- Dimensions: 76x17x19 mm
Fibaro Wall Plug (Adapter Plug):
- Switchable adapter plug (type F)
- Max. Load: 2.500 W
- Energy metering function with overload warner
- Colorful LED ring displays current energy consumption level
- Extreme simple use
- Smallest adapter plug
- Dimensions: 43x43x65 mm
Fibaro Motion Sensor (Multi-Sensor):
- Detects motion Bewegung
- Measures brightness (light intensity) and temperature
- Tamper protection (accelerometer)
- Configurable color LED signals temperature level, detected motion etc.
- Compact spherically design
- Dimensions: 47x47x47 mm
Features:
- Starter kit with Z-Wave control center and 5 single devices
- Comprehensive bundle package allows different automation scenes and functions
- Easy expandable with additional Z-Wave components
- FIBARO Home Center Lite
- FIBARO Flood Sensor
- FIBARO Smoke Sensor
- FIBARO Door/Window Sensor
- FIBARO Wall Plug
- FIBARO Motion Sensor
- FIBARO Swipe
- Wireless Technology: Z-Wave
VIDEO about the FIBARO Swipe:
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0000000x0.0000000x0.0000000 mm |
| Weight | 370 gr |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.