Heatit (Thermo-Floor)

Heatit Z-Gateway

SKU: HEAE4512699


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Heatit Z-Wave Gateway is a smart home control unit with a modern design. Heatit Z-Gateway has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway. This saves the installer a lot of work. This gateway allows you to control all Z-Wave devices in your home via tablet or mobile phone. The gateway is designed for easy setup and operation. With just a few clicks, you can easily add Z-Wave devices and create scenes. The settings are simple, but the possibilities are almost limitless.

Push notifications are supported, so you get notifications from your phone when an event is triggered in the smart home system, even when the phone is in sleep mode.

Voice control via Amazon Alexa and Google Home is also supported, and you can manage the system through voice commands.

The Heatit Z-Wave gateway gives you endless opportunities to tailor your smart home to your specific needs.

Features:

  • Z-Wave gateway
  • SmartStart
  • Controls up to 120 Z-Wave devices
  • Controls up to 12 devices in one scene
  • Up to 60 scenes
  • Support for Amazon Alexa and Google Home
  • Push notifications
  • Optional alarm function for each connected device
  • Software update via FTP
  • Internal real-time clock
  • S2 Security

Technical Data:

  • Protocol: Z-Wave Plus
  • Rated voltage: 230V AC 50Hz
  • Ambient temperature: 0°C to 50°C
  • Humidity: Max. 80% RH
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0960000x0.0960000x0.0210000 mm
Weight 129 gr
EAN 7071236014966
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device