myStrom
myStrom WiFi Switch Type F
SKU: MYSLPQWSE1
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
myStrom WiFi Switch - The versatile WiFi socket with power metering features that makes connected devices smart, knows your room temperature and protects your home.The smart WiFi socket that turns connected devices on and off, automatically saves electricity and protects your home. Accurately measures power consumption and generation. Designed in Switzerland. For Schuko sockets.
Intelligent power saving.
With a simple swipe in the myStrom app, you can switch connected devices on or off – regardless of your location.
Save electricity intelligently.
By measuring consumption, you will learn how much power your devices consume, at what cost and at what time of day. You can use this information and have your switch automatically save power using a schedule and timer, with the sophisticated Power Savers and the versatile Power Actions.
Get to know your solar power generation and make optimal use of it.
Track how much power your solar panel generates, with what yield and at what time of day – now full-screen with the myStrom Cockpit. Use your yields optimally with the practical Solar Actions.
"Hey Siri..."
Turn on connected devices with your voice and use the device with the Apple Home app.
Know your room temperature.
The practical temperature sensor makes your WiFi switches even more useful, helping you easily maintain the ideal room temperature. with ease.
Also works with your washing machine.
With a maximum power consumption of 16A, you can use the switch wherever you want.
Features:
- WiFi smart plug, smart adapter plug.
- Save electricity by automatically switching on and off by timer, schedule, stand-by and when exceeding user-definable limits
- Full-screen display of power consumption and power generation of mini photovoltaic systems, including costs and returns
- Controlling devices from anywhere
- Voice control with Siri, Alexa and Assistant
- Useful temperature sensor
- Presence simulation via random switching (via a connected lamp)
- Compatible with Apple Home, Amazon Echo, Google Assistant and other Smart Homes
- An existing WLAN network is required for control.
- Nominal voltage: 230V, 50Hz, type F
- Nominal current: 16 A
- Wireless technology: WLan IEEE 802.11n / 2.4 GHz
- Scope of delivery: WiFi Switch, manual
- Compatibility: Homey, Homee, IFTTT, Amazon Alexa, Google Home, Apple HomeKit...
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0580000x0.0580000x0.0850000 mm |
| Weight | 115 gr |
| EAN | 7629999096530 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.