Nuki
Nuki Smart Lock 4. Generation
SKU: NU-SL4G
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Nuki Smart Lock (4th Generation) – The Smartest Door Lock Ever.
With an improved battery life and Matter support for seamless integration into your smart home.
The Nuki Smart Lock turns your smartphone into a key. With the free Nuki App, you can open your front door in seconds with a simple swipe or even automatically with the Auto Unlock feature. Simplify your daily life with practical features and smart automations.
Gone are the days of insecure key hiding spots. Grant up to 200 individual access permissions to those who matter most to you. A quick look at the log and you"ll know who came and went. With the separately available remote access service or the Nuki Bridge, you can also control your Nuki Smart Lock from anywhere.
Thanks to the new universal communication standard, Matter, you can now connect your smart home devices more easily than ever – regardless of model or brand. The Nuki Smart Lock impresses with a battery life of up to six months.
Installation is easy, taking just a few minutes without screws or drilling. If needed, the Nuki Smart Lock can be removed without leaving any traces. If you move, simply take it with you.
Enhance your Nuki Smart Lock with our wide range of accessories. Find the perfect combination that fits you and your lifestyle.
Check now to see if Nuki fits your door: nuki.io/check
Features:
- The Nuki Smart Lock turns your smartphone into a key
- Open the door with a swipe or automatically with Auto Unlock
- Grant up to 200 access permissions
- Convenient log feature: Check who came and went and when
- Remote access available separately as a service or via the Nuki Bridge
- Easy connection to existing smart home devices thanks to Matter
- Battery life of up to six months
- Simple installation without screws or drilling – check now if Nuki fits your door: nuki.io/check
- Accessories available
Technical Specifications:
- Product: Nuki Smart Lock (4th Generation)
- Color: White
- Weight: 460 g
- Dimensions: 110 x 60 x 60 mm
- Power Supply: 4 x AA Batteries
- Communication: Bluetooth 4.0 and higher, Matter-over-Thread
- Operating Temperature: 10-40 °C
- Delivery Contents: 1 x Nuki Smart Lock (4th Generation), 1x Manual, 1x Mounting Materials
- Requirement: We recommend using Nuki with the latest version of iOS, Android, or EMUI (Huawei).
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0600000x0.1130000x0.0650000 mm |
| Weight | 205 gr |
| EAN | 9120072083334 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.