Popp

POPP ZB-Shield (Zigbee)

SKU: POPE701561


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

With an increasing number of Zigbee devices: Philips Hue, Osram, Iris, Ikea Tradfri, Xiaomi Aqara, and others – it’s interesting to use these products for Do It Yourself scenarios. This makes the POPP ZB-Shield possible, because the smart device switches your Raspberry Pi into a universal Zigbee gateway by being connected to the GPIO"s.

A big variety of Zigbee devices can be used to create automations and other functionalities. Control and monitor sensors, actuators, thermostats and much more. All you need is the ZB-Shiel and an open source platform like HomeAssistant or OpenHAB. With that you can create rules and scenarios, which will increase your comfort and safety. The best: you save energy at the same time.

Another advantage is that no additional hidden costs await you. In addition, your data remains yours, because no cloud is needed to save your scenarios and/or rules. The POPP ZB-Shield is designed specifically for Raspberry Pi (1,2,3,4). It is based on EFR32MG1 SiLabs chip, which is a 2.4-GHz IEEE 802.15.4/Zigbee microcontroller.

Features:

  • 2.4GHz globally recognised frequency
  • Zigbee compatible microcontroller EFR32MG1 inside
  • Size: 28×18 mm + 10mm RPi header
  • Rx sensitivity: -99dBm
  • Tx power: 13dBm
  • Visual range communication: 200m
  • UART interface with standard NCP commands from Silicon Labs
  • Multiple plugins for openHAB, Home Assistant, Node-RED and other DYI platforms C, Node.js and Python libraries to build your own application

For a tutorial to see how to use the ZB-Shield with Home Assistant visit www.popp.eu/zb-shield/.

Download high resolution images for POPP products.
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0300000x0.0120000x0.0190000 mm
EAN 4251295701561
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device