Quickstart
This is a
Z-Wave Device for XXXQFrequencyName.
To run this device please insert fresh 2 * AA batteries.
To run this device please make sure the internal battery is fully charged.
Tripple Click the large button ot include or exclude the device
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
This is the new low cost Smoke Sensor from Siterwell
| Reset to factory default |
XXXResetDescription |
| Inclusion |
XXXInclusionDescription |
| Exclusion |
XXXExclusionDescription |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
1 |
|
| 2 |
5 |
|
| 3 |
5 |
|
| 4 |
5 |
|
| 5 |
5 |
|
Technical Data
| Hardware Platform |
ZM5202 |
| Battery Type |
2 * AA |
| Firmware Version |
01.4a |
| Z-Wave Version |
04.21 |
| Z-Wave Product Id |
0266.0003.0005 |
| Frequency |
Europe - 868,4 Mhz |
| Maximum transmission power |
5 mW |
