tedee
tedee Lock PRO Gold (Bluetooth)
SKU: TEDBTLV10DHK
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
tedee Lock Pro may look like an ordinary door knob, but it"s packed with cutting-edge smart technology: This intelligent door lock allows you to control access via smartphone or HomeKit without compromising on elegant design. With a powerful motor and a compact diameter of just 45 millimeters, the tedee PRO is made from aluminum both inside and out, making it especially quiet in operation.
You can unlock and lock your door without a physical key — simply by using your smartphone, Apple Watch, or voice command. The lock can be controlled via Bluetooth and the tedee app (available for Android and iOS), or through Apple HomeKit. Integrated into your HomeKit setup, tedee PRO is easily managed via the Home app or Siri. You can create automation routines, assign access permissions, and connect it with other smart devices.
Additionally, tedee PRO can be integrated with Amazon Alexa, Fibaro, Google Home, Loxone, and other smart home systems through its Web API (requires the tedee Bridge, sold separately).
The Auto-Unlock feature in the tedee app adds further convenience by automatically unlocking the door as you approach. The latch retracts briefly and can automatically relock after entry. The tedee app for iOS and Android provides full control over who can access your home, when, and how. You can grant permanent, time-limited, or recurring digital keys from anywhere at any time — whether it’s for family, guests, or service providers. A detailed activity log offers transparency about who accessed your home and when.
Installation requires either a special cylinder (such as the adjustable GERDA security cylinder, or third-party cylinders with a compatible tedee shaft) or an adapter for existing cylinders (sold separately). The tedee PRO is mounted on the inside of the door and fixed in place. Calibration is completed in a few simple steps via the app. The built-in rechargeable battery is designed for overnight charging. The included magnetic charging cable detaches safely if the lock rotates, the door moves, or the cable is pulled — preventing tripping hazards.
Highlights:
- Smart Bluetooth door lock with HomeKit integration for easy control via smartphone, Apple Watch, or voice command
- Never lose your key again: Control via Apple Home app (HomeKit) or tedee app for iOS (14.0+) and Android (8.0+)
- Further integrations possible (tedee Bridge required, sold separately): Amazon Alexa, Fibaro, Google Home, Loxone, and other systems via Web API
- Physical key operation remains possible
- Auto-Unlock: door unlocks automatically when approaching (via tedee app only)
- Latch can retract and lock automatically afterward
- Full access control: grant permanent, temporary, or recurring digital keys anytime from anywhere
- Activity log in the tedee app shows who entered and when
- High-level security with 256-bit encryption and TLS 1.3 protocol
Technical Data:
- Dimensions (D x H): 45 x 55 mm
- Weight: 196 g
- Connectivity: Bluetooth or HomeKit
- Torque: 1.6 Nm
- Built-in rechargeable battery with 6–14 months battery life
Scope of Delivery:
- tedee PRO smart door lock
- Micro-USB charging cable with magnetic adapter
- Allen key
- User manual
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0550000x0.0550000x0.0450000 mm |
| Weight | 192 gr |
| EAN | 5907720713973 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.