Tesvor
Tesvor S6 Robot Vacuum and Mop
SKU: TESLS6
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
The Tesvor S6 Robot Vacuum and Mop is a powerful robot vacuum cleaner with wiping function. The entry-level all-round cleaner offers you innovative technology and navigation (e.g. LIDAR, SLAM) as well as useful cleaning functions (e.g. "Smart-Cleaning" and "Spot-Cleaning").
For a very attractive price, the smart device offers adjustable suction strengths, an automatic charging function and operation via smartphone app and voice control. Thanks to its simple operation, the vacuuming and mopping robot from Tesvor is an ideal entry-level model for households with up to 150 m². The vacuuming robot with wiping function independently takes over the daily dry and wet cleaning of your home. It doesn"t matter whether the surfaces to be cleaned are parquet, hard floors, tiles or carpets.
The Tesvor S6 has modern sensors (including LDS LIDAR) and smart functions that enable the device to map your living space in real-time. The S6 learns your surroundings and calculates the best cleaning route to avoid obstacles.
With the "Smart Cleaning" method, the robot vacuum first follows the outline of the area and then moves in S-shaped wavy lines from one side to the other. In this way, the device cleans much more efficiently and faster than other models. In "Spot Cleaning", the Robot Vacuum Cleaner starts at a selected point and moves outwards in a spiral. After 2 minutes of cleaning, the robot vacuum with wiping function stops automatically.
The Tesvor S6 has different suction strengths, which can be set according to your needs. The smart robot vacuum cleaner does dry and wet cleaning in one run. Please note that the robot can no longer cross door thresholds due to the water tank attachment. If there are doorsteps, it is better to plan the complete cleaning room-by-room.
The robot is controlled either via the Smartphone App (Android or iOS), via the included remote control or simply via Voice Control. In the app, you can set different cleaning modes for each room and also set up so-called restricted zones, e.g. where the robot vacuum cleaner should not wet-mop. This way, an entire room can be cleaned dry and wet in one pass, but the cleaning mode can be selected individually as desired.
If you would like to pause the Robot Vacuum Cleaner temporarily, there are two different options. Either you press "Pause" or you move the smart device to another place. If you start the cleaning process again, the S6 automatically returns to its original point and continues cleaning.
But that"s not all, as the robot vacuum cleaner with wiping function automatically detects when its battery is low and returns to the charging station on its own.
Features
- Intelligent Laser and Gyroscope SLAM Navigation
- Suction power: 2,700 PA
- Wifi Contact: Yes
- Vacuum and Mop in One
- Electronic water tank: 350 ml
- Powerful fan, double brushes and effective air filter
- NIDEC brushless motor
- Quiet during cleaning despite high performance
- Suitable for pet hair
- Fall protection
- OTA technology
- Multi-surface cleaning from hard floors to medium-high carpets
- Automatic return to charging station
- Charging time: 240 to 360 minutes
- Maximum Runtime: Up to 120 minutes
- Control via remote control, app (iOS, Android) or voice
- Compatible with Amazon Alexa and Google Assistant
- Operating Noise: Li-ion battery (2,500 mAh)
- Volume: < 70 dB
- Dust container capacity: 600 ml
- Barrier-cross Height: 18 mm
- Virtual Wall: Magnetic Strip Tape or mapping function
- Filter:3-fold HEPA filter technology
- Scope of delivery: S6 Robot Vacuum and Mop, charging station, main brush, manual, adapter, filter, remote control unit, water tank, cloth, 2x side brushes
Download high resolution images for Tesvor products.
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.3400000x0.0980000x0.3400000 mm |
| Weight | 4000 gr |
| EAN | 6973104880066 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.