This is a
A This is a Z-Wave actuator. Inclusion and Exklusion are confirmed
by hitting the button one time.
The TKB TZ68 is a switch plug that can be placed between a wall outlet for Typ F Plug and electric devices, plugged in by cord. It can switch resistive loads up to 300 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.
The Switch Plug can be plugged into every wall outlet for Plug-Types according to the device version (CH, F, G, E). It is IP20 rated and can therefore only be used in dry environments. Do not locate the device facing direct sunlight, humid or dusty place. The suitable ambient temperature for the device is 0°C ~ 40°C.
The device is able to switch electric load up to 300 W. Short press of the button will toggle. This means that the power will be turned on if it was off and turned off when it was on.
| Reset to factory default | XXXResetDescription |
| Inclusion |
To confirm Inclusion or Exclusion hit the button on the device. |
| Exclusion |
To confirm Inclusion or Exclusion hit the button on the device. |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 |
| Device Type | On/Off Power Switch |
| Generic Device Class | Binary Switch |
| Specific Device Class | Binary Power Switch |
| Firmware Version | 02.00 |
| Z-Wave Version | 04.05 |
| Z-Wave Product Id | 0118.0003.0002 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |